How the Quencher Spark Arrestor Works

Dust collection systems are designed for laminar flow in ducts, to keep pressure drop to a minimum; (1) creates a hot air envelop (800 degrees F) around the spark/ember (1400 degrees F) and feeds oxygen to the spark, (2) the spark is buoyed up and floats along in the gas stream for 100 feet or more.

The QUENCHER spark arrestor creates extreme turbulence and breaks apart the envelop, strips the oxygen (fuel) away from the burning spark, extinguishing and cooling it. The temperature of the spark, leaving the QUENCHER, is now too low to cause an ignition and fire. The cooled sparks are safely carried along the gas stream to the dust collector.

For an explanation of how our Quencher Spark Arrestor works you can watch our video here.
The Booster Cell Cleaner is an add-on option that is shown toward the end of the video, below.

Cell Cleaner & Booster Add-on

Installing our Booster Duct Cleaner will help boost airflow and clean dust build-up in your ducts. The Booster Duct Cleaner is easy to install and uses advanced pulse jet technology, each cleaner is able to handle 20-50 feet of duct. If you need more, you can simply install multiple Booster Duct Cleaners for any duct runs. Designed, Engineered and assembled in the U.S.A. and Canada. Our component suppliers are strictly American and Canadian.

Our Booster Duct Cleaner is a strongly recommended option because it is important for the Quencher cell & blades be kept free of combustible dust. Accumulations from heavy dust loading could cause a fire and void the warranty. To help reduce the issues associated with dust accumulations, an optional CELL CLEANER / BOOSTER device can be installed in front of the Quencher. This device can be actuated manually or automatically and is OSHA & NFPA friendly.

Our Booster Duct Cleaner Is A Low Cost Simple Solution
For Dust Dropout In Dust Collection Systems